Amiga week

Last Updated or created 2024-04-29

This week (while preparing for a mini retro party) I fixed some Amiga stuff.

I’ve bought a new gadget.

You place this PCB between the CPU IC socket and the CPU (68000) itself.

Now running a special floppy image, which loads a driver, I can use the 512MB sdcard as “harddisk”.

It at first ran into all kinds of hangups.
Checking everything, I found CIAB (8520) the culprit.
Timing errors I’ve never noticed before!

Switching this one with CIAA resolved the problem.
(I don’t use a printer anyway, but I have to remember that anything using the parallel port can have problems now.)

Meanwhile, I wanted to have a better control over the Amiga drives, so I’m planning to use a second switch to reassign drive numbers using a switch.

For switching Internal/External drive (df0/df1) I was using a Gotek boot switch. (Just press 3x ctrl-Amiga-Amiga)

See https://www.henriaanstoot.nl/2022/05/14/gotek-stuff/

But I have TWO external devices.
The Gotek virtual disk device and a real 5.24″ drive.

So I’m going to use a ON-ON double switch to toggle the external devices.

oppo_32

The internal switch toggles internal and external.
The secondary I’m going to build into the 5.25″ drive toggles df2 and the “df1”.
That way the internal drive can be 0 (boot) or 1.
The external drives can be 0,1 or 2.

NOTE: Switch pin 21 and 9 using the cross switch!

SO: Amiga with internal drive -> External 5.24″ which has a passthrough to the Gotek.

Another amiga thing fixed:
I re-installed Aros (on an old Laptop this time)

And third: I’ve bought the Amiga Forever cdrom.

When you get the ISO image from AmigaForever, and want to run it using Linux, do this to get it working

sudo apt install xkbfile1:i386
sudo apt install libxkbfile1:i386
mkdir -p /cdrom
sudo mount -t iso9660 ~/Downloads/AF.iso /cdrom
cd /cdrom/Private/Linux/e-uae/
./kxlight-start.sh

If you install Wine, you can use the windows gui in linux also.


Amiga samplers

Testing the sampler (demo for Tyrone)

Sampling the sound of a C64 on an Amiga.
Started (booted) the sampling program from second external drive using switch setup as above.

Even realtime echo works!
Spread the love

Leave a Reply

Your email address will not be published. Required fields are marked *